What are QR-Codes used for? 

Sablono uses QR-Codes to simplify navigation in the mobile Sablono App. There are two different types of QR-Codes available:

  1. Deliverables-Codes: If you scan such a code with the Sablono App it will automatically navigate to a specific Deliverable. These codes should be used to mark single Deliverables. Using it will save the site inspectors valuable time since he does not have to navigate through the whole application. After scanning the Code, the state of the Deliverable can be changed.
  2. Project-Structure-Codes: If you scan a Project-Structure-Code, the Sablono App will automatically set a specific Project structure filter. These Codes should be used to mark buildings or floors. If a site inspector enters the area he can quickly scan the Code. The application will display all area-relevant Deliverables automatically.

 

How can QR-Codes be generated?

Deliverable-Codes

1. First, choose a Project that you would like to create QR-Codes for.

2. Select "Deliverables" from the side navigation.

3. Filter the list or select the Deliverables for which you want to print QR-Codes.

4. Now click on the printer icon in the toolbar.

5. In the following dialogue please choose the QR Code option and then the format you prefer.

6. The QR-Codes will be automatically saved as a PDF file in your local download folder. Place the appropriate Avery Sticker Paper in your printer, and you are ready to print and use your QR-Codes. If you would like to create adhesive labels out of them, you can use the labels from Avery Zweckform:

2x6: permanent - ID L4776-20

2x6: removable - ID L4743-100

1x2 Permanent - ID L4717REV-20

1x2 removable - ID L3655-10

IMPORTANT NOTE: While printing, please make sure to uncheck the "Fit to page" box option to ensure that labels have the same scale as stickers. Below you can see the example.

Project-Structure-Codes

1. First, choose a Project that you would like to create QR-Codes for.

2. Select "Project Structure" from the side navigation.

3. Click on "PRINT QR-CODES" in the top right corner.

4. In the following dialogue please choose your preferred format and which QR-Codes you want to print.

5. The QR-Codes will then be saved as a PDF file in your local download folder. Place the appropriate Avery Sticker Paper in your printer, and you are ready to print and use your QR-Codes. You can use the following adhesive labels from Avery Zweckform:

2x6: permanent - ID L4776-20

removable - ID L4776REV-20

1x2: permanent - ID L4717-20

removable - ID L4717REV-20

IMPORTANT NOTE: While printing, please make sure to uncheck "Fit to page" box option to ensure that labels have the same scale as stickers. Below you can see the example.

As you can see, QR-Codes can easily be generated to make navigation within the Sablono App easier and faster.

Continue to Step 8. How to download the Sablono App

Did this answer your question?